Wednesday, January 27, 2016

DIY Anti-Aging Frankincense Face and Neck Cream


I recommend this cream as a night cream as it goes on wet and stages down into an oily feel, before it absorbs into a silky smooth hydrated feel. Apply to face (eye lids also!), neck and décolleté. If you want to amp up the toning anti-aging properties of this cream, put a little in the palm of your hand and mix in a few drops of rosehip seed oil.

*Please note that rosehip seed oil is a natural retinol (vitamin A) and should not be applied to the skin neat (undiluted) always buffer the essential oil into or on top of a cream before applying it to the skin.

What you will need:

*Electric hand mixer
 
 
Melt and stir together the bee's wax, cocoa butter, coconut oil and carrier oil in a double boiler or over low heat.
In a separate mixing bowl combine and mix the (water soluble ingredients) aloe gel and frankincense milk, once the oils and wax are melted, slowly pour the oil mixture into the milk and gel mixture as you blend on low with the hand mixer. As the cream begins to form you can up the speed of the mixer to get a creamer texture, when the cream has cooled down, use the hand mixer again to mix in the vitamin E and frankincense oil.
 
This cream does not need to be refrigerated but it is a refreshing treat when applied cold!

Beauty Witchery "Conjuring the Glam" with Frankincense

 
 
 
 
We all know the most common magickal properties and uses for this wonder filled resin, from cleansing sacred items and ritual space to adding it into spell craft ingredients for raising positive energies within workings and yet this little gift from nature has many more practical and magickal uses especially when it comes to getting our natural beauty glamour witching going!
 
 
When it comes to skin care frankincense is one potent ingredient that helps to protect the skin cells, as an astringent it can aid in reducing acne blemishes, help reduce the appearance of large pores, fade scars and hyperpigmentation. It also aids in healing wounds, cystic acne, scraps and itchy inflamed skin. Frankincense oil has been used to remove skin tags, moles and warts.
 
Adding frankincense into your anti-aging creams, lotions, serums, balms and salves will give the brew a boost in tightening sagging skin, fading dark spots, smoothing out fine lines and wrinkles.   
 
 
If you're interested in learning more about this resin and its uses, here is great link:
 
 
 
 

 
 



 
 
 
 
 


DIY Frankincense Extract Oil

 
 
To make your own frankincense extract oil the resin tears need to be crushed and put through a heated water soak to dissolve the water soluble compounds (See our post on Frankincense Milk). Please note that a concentrated extract oil can not be achieved without first removing the water soluble compounds.
 
Once you have heat soaked and dried your left over resin it's time to re-crush and powder it, the easiest way to powder crush any resin is to freeze it first. If you read the frankincense milk post this post picks up from that procedure of using the left over, undissolved resin gum from two heaping table spoons of resin tears. I measure two table spoons out before I crush the resin for the milk procedure, normally the left over undissolved resin will measure about and close to half of what I started with. This resin gum is easily dissolvable in most carrier oils, as with the milk/water I warm the oil on my coffee mug warmer. I measure out 1/2 cup of the carrier oil I want to use and place the powdered resin in it, the heating time varies as I continue the warming until I can see and tell that no more residue will dissolve, usually 12 to 18 hours. The left over residue normally measures out to be about 1/8 to 1/4 teaspoon. When I'm not planning on using the oil in a salve or cream I will not bother to strain out the residue. *Reminder: Use a disposable plastic spoon to stir the oil, the resin is very sticky!
 
 
 
Here is a link to Dan Riegler's blog and his post on making an extract, Dan is the go to man for resin knowledge! (and products!)
 
 
 
 
For Dan's Esty shop:
 
 
 

DIY Frankincense Milk (Beauty Witchery)


Frankincense milk (a.k.a. Frankincense Water) is easy to make, simply soak and/or heat the crushed resin tears in filtered (distilled or purified) water to dissolve the water soluble compounds from the resin, which leaves us with this milk white fluid and some very sticky gum resin. A quick google search (Frankincense Water) will bring up a vast source of articles on the benefits and uses of this substance.  It is said to lighten, tone, firm and tighten skin, also stimulates skin and tissue regeneration.
I use it in my face creams and body lotions. A two part milk to one part mixture with witch hazel works as a great skin brightener and toner.
 
 
The traditional way of making frankincense water is to soak 4 or 5 pieces of resin tears in water over night, but the way I make it is to add two heaping table spoons of the resin tears (crushed up after measuring) to 3/4 cup (6 oz) of water and then slowly heat on my coffee mug warmer. I warm the water and resin, stirring occasionally (with a disposable plastic spoon), for 12 hours the first day, refrigerate the water and resin mixture over night and then reheat for another 12 hours the second day (total of 24 hrs. heating).  
 
DIY Frankincense Extract Oil
 
Once the heating process is finished, while the water is warm, I spoon out all the sticky resin gum and place it on a non-stick cookie sheet to dry and harden. Then I strain the white milky water through cheese cloth or sterile gauze before I bottle it. Refrigerate the milk until ready to use, if you will not be using the milk within 7 days, it can be froze to maintain freshness.
 
 
 *Don't toss the gum resin as this can be used for making your own frankincense extract oil.